Timing Control; Out Arm Delay Setting; Alarm Delay Setting; Alarm Number Setting - Konlen MOBILE CALL GSM Alarm System User Manual

3). Timing Control

In setup status, use keypad to input [39], then input the number indicating
turning on timely arm/ disarm [1/0], and then input [#] to confirm. You will
hear a long beep and a voice prompt "setting completed". The factory
default is off.
Operating method: [39] [0/1] [#]
0: turn off the function of timely arm/ disarm
1: turn on the function of timely arm/ disarm
For example: turn on the function of timely arm/ disarm
Operating method: [39] [1] [#]
Time Setting for Out Arm Delay (Default: 60 sec)
In setup state, input the command: 44 + [XX] + #
XX indicates: the delay time of out arm; XX= 01-99: 1 sec to 99 sec
Note: The setting is effective only with the keypad operation.
The operation by remote controller or SMS is immediate arm without delay.
Time Setting for Alarm Delay (Default: 40 sec)
In setup state, input the command: 45 + [XX] + #
XX indicates: the delay time of alarm; XX= 01-99: 1 sec to 99 sec
Note: The setting is effective only when a zone is set as Alarm Delay Zone.
Note: Before the system enters arm or alarm status
it will emit a "Di" sound per second.

12. Alarm Number Setting

In setup state, input [ 51] ~ [ 56 ], then input the voice alarm-receiving
number (mobile number or telephone number), and then press [#] to
confirm. The main unit will make a long beep, the [Signal] indicator will
flicker once, and you will hear "setting completed" , which indicate
voice alarm-receiving number is set successfully.
Operating method: [XX] [YY...YY] [#]
10
Functions Settings
Functions Settings