Delete Defense Zone; Change Password; Change Operation Password; Change Program Password - Konlen MOBILE CALL GSM Alarm System User Manual

8. Delete Defense Zone

The wireless detector can' control the main unit after it' deleted.
In setup state, use keypad to input [24], then input the defense zone
number you want to delete [ 01~99 ], and then input [#] to confirm.
The main unit emits a long beep and the defense zone indicator
flickers once.
You will hear a voice prompt "delete completed".
Operating method: [24]
XX indicates: 01 ~99 defense zones number

9. Change Password

1). Change Operation Password

Operation password is the password used to disarm or remote control.
In setup status, use keypad to input [30], then input the 4-digit new
password, and then press [#] to confirm. The main unit will make a long
beep and you will hear a voice prompt "setting completed".
Operating method: [30]
XXXX indicates: the new 4-digit password
For example: change the system password to 1012
Operating method: [30]
LCD display:

2). Change Program Password

Program password is the password you should input in order to setup
the system.
In setup status, use keypad to input [ 31 ], then input the 4-digit new
password, and then press [#] to confirm. The main unit will make a long
beep and you will hear a voice prompt "setting completed".
7
Functions Settings
t
[XX] [#]
[XXXX] [#]
[1012] [#]
Functions Settings
s