DataCard SR200 Installation Manual page 37

6.
Select the printer that corresponds to the printer's unit number. For example, if the unit
number is 6, then select SR‐CP U6. Click Next.
The default printer name is typically U1. The unit number selected here must match the
unit number set on the printer's LCD panel. (Refer to "Setting the Unit Number, Printer
Name, and Connection" on page
7.
Enter a Share name or use the default specified. Click Next.
SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide
59 to find or change the printer's unit number setting.)
29