Unpacking The Printer; Unpacking The Laminator - DataCard SR200 Installation Manual

The shipping carton for the laminator contains:
LM200 or LM300 card laminator

Joining plate

Cleaning card

Power cord

Take‐up core

You must provide these items or order separately:
USB cable

Network cable (if printer is to be used over a network)

Ink ribbon

Retransfer film

Blank cards

Cleaning kit

Refer to the Datacard SR200 & SR300 Card Printers and LM200 & LM300 Laminators User's
Guide for part numbers and ordering information.

Unpacking the Printer

Caution: The card printer weighs approximately 27.6 pounds (12.5 kg) with options
installed. Use care when removing the printer from the shipping container.
Remove the SR200 or SR300 card printer from the shipping carton. Remove all packing tape from
inside and around the printer.
Save the shipping carton and packaging materials. They are required if you need to store,
move, or return the printer for service. Replacements are not available.

Unpacking the Laminator

Caution: The laminator weighs approximately 17 pounds (8 kg). Use care when removing
the laminator from the shipping container.
Remove the laminator from the shipping container. Make sure to remove all packing tape inside
and around the laminator. Remove the protective cushion that protects both the heated roller
and the platen roller.
Save the shipping carton and packaging materials. They are required if you need to store,
move, or return the laminator for service. Replacements are not available.
SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 3