Installing The Iclass/Pcprox Driver And Support Files; Installing The Iclass Reader - DataCard SR200 Installation Manual

Installing the iCLASS/pcProx Driver and Support
Files
If your SR200 or SR300 card printer has an optional iCLASS/pcProx smart card reader, use one of
these procedures to install the driver and support files.

Installing the iCLASS Reader

1.
Install the driver.
a.
Connect the USB cable for the reader to the computer. A message displays indicating that
driver is installing.
b.
A message displays when the driver installation is complete. Click Close.
c.
Open the Device Manager and click Human Interface Devices to expand the installed
devices list. The driver for the iCLASS reader displays as HID‐compliant device.
2.
Install the AIR ID Card Manager.
a.
Get the AIR ID Card Manager software from Datacard.com.
b.
Proceed through the installation wizard to install the AIR ID Card Manager. The program
folder displays in the All programs list as RF IDeas, Inc. Click the RF IDeas, Inc program
folder to expand the installed files.
c.
Click AIRIDCardMan.exe to open the AIR ID Card Manager.
24 Installing the Smart Card Driver