Vessel Settings - Raymarine P70 Installation Instructions Manual

6.1 Vessel Settings

Vessel settings can be accessed from Main menu > Set up > Auto
pilot calibration > Vessel settings.
Note: When connected to a SeaTalk system the vessel settings
listed below are part of the Dealer settings menu, Main menu >
Set up > Auto pilot calibration > Dealer settings.
Note: Limits are set by the installed course computer and so
not all limits may be available.
Item Description
Vessel The vessel type options
type will normally give optimum
performance for typical vessels
of each type. However, you
may find you can improve the
performance of your vessel
by selecting an option for a
different vessel type.
48
Options
• Race sail.
• Sail cruiser.
• Catamaran.
• Workboat.
• RIB.
• Outboard speed boat.
• Inboard speed boat.
• Power cruiser 1. —
vessels capable of speeds
up to 12 knots.
• Power cruiser 2.— vessels
capable of speeds up to 30
knots.
• Power cruiser 3 — vessels
capable of speeds greater
than 30 knots.
• Sport fishing.
Item Description
Drive type List of compatible drive types.
Cruise Set the cruise speed to the
vessel's typical cruising speed.
speed
If no speed data is available,
the SmartPilot system will use
the cruise speed value you set
here as a default when adjusting
autopilot settings.
Options
• Pro fishing.
• Type 1 linear.
• Type 2 linear.
• Type 2 hydraulic linear.
• Type 3 hydraulic linear.
• I/O stern.
• CAN.
• Wheel drive.
• Tiller.
• Sport drive.
• Rotary drive type 1.
• Rotary drive type 2.
• Hydraulic pump type 1.
• Hydraulic pump type 2.
• Hydraulic pump type 3.
• Constant running pump.
• Verado.
• 0 — 99 Kts
p70 / p70r Pilot controller Installation instructions