Installation Instructions Step; Connect The Transmitter To Your Tv - TV Ears 3.0 System Installation Manual

Installation | Step 1
Connect the Transmitter to TV
Analog Audio
1. Plug the dual end of the audio cord (red and black male
plugs) into the analog (RCA) audio out ports on the back of
the television, satellite, or cable box.
2. Plug the single end of the audio cord into the port labeled
Audio on the back of the TV Ears transmitter.
TIP
1. Ports on the front of TVs are usually audio in ports and
2. Fixed/Variable Audio Setting: audio out ports may
will not send sound to your TV Ears.
be marked fixed or variable/fixed or L& R. A fixed
audio out setting will allow the television volume to
work independently from the TV Ears headset. The
television volume can be on mute or at a low level
while the TV Ears' volume can be turned up.
• Consult your television manual / manufacturer to
manually program the television to FIXED audio if
currently set to VARIABLE audio.
5