Installation Instructions; Step 1 | Plug In The Audio Cord - TV Ears 2.3 System User Manual

Installation
Instructions
Step
1
11
3
Plug in the
Audio Cord
For best results, plug the audio cord into your
television's analog (RCA) audio out ports.
1. Plug the dual end of the audio cord
black male plugs) into the analog (RCA) audio out
ports on the back of the television. *
2. Plug the single end of the audio cord into the
port labeled 'Audio' on the back of the TV Ears
transmitter.
*If audio out ports are not available on the back of
your television: use the audio out ports on your cable
or satellite box.
*If outside the U.S and audio out ports are not
available on the back of your television: use a SCART
to RCA signal out adapter.
To use a DVD player or VCR when the audio cord is
plugged into a cable or satellite box:
1. Take the dual end of the audio cord
black male plugs); gently pull apart the red and black
plugs.
2. Insert the red plug into the analog (RCA) audio out
port of the cable or satellite box.
3. Insert the black plug into the analog (RCA) audio
out port of the DVD player or VCR.
4. Plug the single end of the audio cord into the audio
port labeled 'Audio' on the back of the TV Ears
transmitter.
When installed this way, you must turn off whichever
device is not in use. Turn off the cable/satellite box
when watching a DVD or video. Turn off the DVD/VCR
player when watching TV.
11
(red and
(red and
11