Table of Contents
Advertisement
Installation | Step 3
Charging the Headset
Each headset comes pre-charged with enough battery
power for at least 10 minutes of use. The headset will
last around 6 hours on a full charge, but will decrease
as the volume reaches higher levels. A fully exhausted
battery will take between 8 - 10 hours to charge
completely. The 1 hour "Quick Charge" feature will
rapidly charge a partially drained battery sufficiently for
typical use, which is around 2 to 4 hours.
1. Turn the headset volume knob to the off position.
You will hear and/or feel a click when it has been
turned all the way into the off position.
2. Place the headset in the transmitter-charging cradle
facing forward.
3. Check to see that the charging lights illuminate. The
left most light on the front of the transmitter will
illuminate green
cradle. The light will illuminate red
in the rear charging cradle. If you own two headsets
and both are charging at the same time, the charging
light should illuminate an amber
We recommend storing the headset in the charging
cradle of the transmitter when not in use to avoid
damaging the headset. Remember, the headset needs
to be turned off when not being used and it cannot be
over-charged.
if there is a headset in the front
7
if a headset is
color.
Advertisement
Table of Contents
