Step 2 Rca Analog Installation - TV Ears 5.0 Analog User Manual

Step 2 RCA Analog Installation

This step will explain how to connect the TV Ears transmitter
to your television, satellite, or cable box using an RCA analog
audio cord.
• If you cannot get to the back of your TV, you can also use these
instructions to install the system to your cable or satellite box.
• Be aware that the "Audio" ports on the front of your television are
typically "Audio In" ports and will not send audio to your headset.
1
Plug the dual end of the audio cord (red and black ends)
into the analog "Audio Out" ports on the back of the
television, satellite, or cable box.
2
Plug the single end of the audio cord into the port labeled
"Analog Audio In" on the back of the transmitter. The
correct port has a yellow border around it.
• TV Ears systems are mono systems. This means that you will still
hear sound through both the left and right earpieces even if you
only have the left or right audio connected.
• Your TV's audio settings may be set to "variable" or "fixed". If you
want to be able to control your TV volume level separate from
your TV Ears volume level, you will need to make sure your TV is
set to "fixed". Contact your TV manufacturer for assistance.
For assistance, call us at 866-611-9934
Analog Audio
3.5mm
9