Panasonic FP-D250 User Manual page 541

(2) Installation procedure
Remove all shipping materials/tape before the installation.
Caution: Make sure the copier is unplugged before the installation.
Location
1
2
3
2
Shipping material/Procedure
(1) Remove the copier rear cover.
(7 screws)
(1) Remove the rear cover mounting
bracket. (paper exit side)
(2 screws)
1
(1) Connect the power harness 1
onto CN18 on the low voltage
4
power supply PCB.
(2) Connect the power harness 2
1
onto CN19 on the low voltage
power supply PCB.
3
(3) Connect the power harness 3
onto CN22 on the low voltage
power supply PCB.
(4) Connect the battery harness onto
CN15 on the low voltage power
supply PCB.
Check
6-15