Panasonic FP-D250 User Manual page 466

Code
Item
No.
c53 CCD detection timing
c54 Registration void of
image
(During use with ADF
FA-A888 = No swing
back condition)
c55 Auto image density in
the Text mode
c56 Auto image density in
the Text/Photo mode
c57 Registration width
guide standard position
(Duplex)
c58 Registration length
guide standard position
(Duplex)
*c59 Paper loop
(Sheet bypass)
*c60 Paper loop
(Copier paper tray
upper) (ADU)
*c61 Paper loop
(Copier paper tray
lower)
c62 Toner density sensor
gain voltage (fine
adjustment)
*c63 Paper loop
(System console)
*c64 Paper loop
LCC
c65 Black density sensor
reference voltage
compensation
c66 Black density sensor
output gain
compensation
5-28
Function
Adjustment of CCD 0.2mm
read position (–42 to +20)
Adjustment of 0.5mm
registration void. (0 to +99)
Adjustment of Auto (–99 to +99)
image density
Adjustment of Auto (–99 to +99)
image density
Adjustment of 0.39mm
registration width guide (–50 to +50)
position (+) Wider
(–) Narrower
Adjustment of 0.30mm
registration length (–10 to +10)
guide position (+) Wider
(–) Narrower
Adjustment for the length 0.8mm
of the loop formed before (–40 to +40)
the copier timing roller. (+) Increase
(–) Decrease
same as F6-c59 0.68mm
*When Duplex unit is (–50 to +50)
installed, second copy
feeding.
same as F6-c59 0.68mm
(–50 to +50)
Adjustment of toner 0.033V
density sensor gain (–5 to +10)
voltage. (+) Increase
(–) Decrease
Adjustment for the length 0.68mm
of the loop formed before (–50 to +50)
the registration roller of
system console.
same as F6-c59 0.68mm
(–50 to +50)
Reference voltage for (–99 to +99)
black density sensor
Compensate value for (–99 to +99)
black density sensor
output
*FP-D600 (Printer function) only.
Remarks