Using The Telephone Base - AT&T CLP99183 User Manual

Multiple handset use
Intercom

Using the telephone base:

1. Press MENU in idle mode to enter the main menu.
q
Press
CALLER ID
then press SELECT.
• If you have one handset, the telephone base shows
Calling HANDSET X.
• If you have more than one handset, the telephone
base shows
enter a specific handset number (1-9 for handsets
1-9, TONE followed by 0-2 for handsets 10-12, or
TONE followed by # for all handsets),
q
CALLER ID
SELECT. The telephone base shows Calling HANDSET X or Calling all.
The destination handset(s) rings and shows Base is calling,
BASE 0 is calling or BASE 0 is calling all.
2. To answer the intercom call, press
CELL 1, CELL 2
handset. Both the base and the handset now show Intercom.
3. To end the intercom call, one party presses END,
the handset back in the telephone base or charger; or presses
telephone base. The other party hears four beeps. Both devices display
Intercom ended.
NOTES:
• Before the intercom call is answered, you can cancel it by pressing
END
handset or on the telephone base. .
• If the called device is not answered within 100 seconds, or accessing the directory or caller ID
log, or is on a call, or is out of range, the initiating device shows No answer. Try again.
• To temporarily silence the intercom ringer, press
handset, or press CANCEL or MUTE on the telephone base.
• You can only use one pair of devices at a time to make intercom calls.
or p
DIRECTORY
INTERCOM TO:
or p
to scroll to the desired handset and press
DIRECTORY
or any dialing key (0-9, TONE ) on the destination
The other party hears four beeps. Both devices display
to scroll to Intercom,
Use the dialing keys to
or press
HOME/
FLASH
OFF/CANCEL or MUTE/
69
Answering sys
Directory
Cal ler ID log
Intercom
p
BACK
q
INTERCOM TO:
HANDSET
HANDSET
All
p
BACK
q
/SPEA�ER SPEA�ER,
,
OFF/ , or places
CANCEL
END
/CANCEL CANCEL on the
OFF
on the
DELETE
SELECT
1
2
SELECT
on the