AT&T CLP99287 Quick Start Manual

CLP99287/CLP99387/
This quick start guide provides you
CLP99457/CLP99487/
with basic instructions only. For
CLP99547/CLP99557/
CLP99587 more complete instructions, refer
to your user's manual provided in
the package, or download it at
www.telephones.att.com/manuals.
Quick start guide
Part lists
Ì
Ì
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH) Ì
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine CR1535
Ì
CLP99287/CLP99387/
CLP99457/CLP99487/
CLP99547/CLP99557/
CLP99587
Quick start guide
Ì
1 for CLP99287
Ì
2 for CLP99387
Ì
3 for CLP99457/
CLP99487
Ì
4 for CLP99547/
CLP99557/
CLP99587
Install
Telephone base
Notes:
Plug one end of the telephone line cord into a telephone jack or a DSL
f f
filter.
If you have DSL high-speed Internet service, a DSL filter (not included)
f f
is required.
Charger
Caution: Use only the supplied rechargeable battery or replacement
battery (model BT183342/BT283342).
Caution: Use only the power adapter(s) provided with this product.
To obtain a replacement, visit our website at
www.telephones.att.com 1 (800) 222-3111
or call . In
1 (866) 288-4268
Canada, dial .
Battery
Install the battery, as shown below. Charge your handset(s)
before initial use. The battery is fully charged after 11 hours
of continuous charging.
2 for CLP99287
3 for CLP99387
4 for CLP99457/
CLP99487
5 for CLP99547/
CLP99557/
CLP99587
User's manual
CLP99287/CLP99387/CLP99457/
CLP99487/CLP99547/CLP99557/
CLP99587
DECT 6.0 cordless telephone/
answering system with
BLUETOOTH® wireless technology
Overview
Handset Handset
Ì Ì
PUSH TO TALK Press to initiate a one-to-one or CHARGE light On when the handset is charging in
one-to-group broadcast. the telephone base or charger.
Ì
Press and hold to broadcast to a
Softkeys (2) Ì Press to select the menu item
group of system devices.
displayed above the key.
Ì
Ì While in a menu, press to select
Press to activate the
VOICE
voice-controlled application of an item, save an entry or setting,
connected cell phone. cancel an operation, or back up to
the previous menu.
Ì Press to make or answer a cell call.
CELL 1/
Ì DIR Ì Press DIR to show directory entries
During a cell call, press to answer
CELL 2
when the handset is not in use.
an incoming CELL 1/2 call when you
hear a call waiting alert. Ì
Press to scroll up or down while in
Ì menus.
Press to make or answer a home
HOME/
Ì
Press to increase or decrease the
call.
FLASH
Ì During a call, press to answer an listening volume when on a call.
Ì While entering names or numbers,
incoming home call when you
press to move the cursor to the left
receive a call waiting alert.
or right.
Ì
During a call, press to hang up.
Ì
Ì CID Press CID to show caller ID log
While in a menu, press to cancel an
when the handset is not in use.
operation, back up to the previous
menu, or exit the menu display; or
press and hold this button to exit Telephone base
to idle mode.
Ì Ì
When the handset is ringing, press Press to scroll up while in a
DIRECTORY
menu.
to mute the ringer temporarily.
Ì Press and hold while the telephone
Ì
Press to show directory entries
is not in use to erase the missed
when the telephone base is
call indicator.
not in use.
Ì
1 Press and hold to set or dial your Ì
Press to scroll down while in a
CALLER ID
voicemail number.
menu.
/ Ì Ì
Press to switch to tone dialing Press to show caller ID log
TONE a>A
temporarily during a call if you when the telephone base is
have pulse service. not in use.
Ì While entering names, press to
Ì
USB port The standard size USB port in
change the next letter to upper or
the telephone base is used for
lower case.
charging your cell phones.
Ì
# Press and hold to enter the
QUIET/
X/DELETE Ì During a call, press to mute the
QUIET mode setting screen, or to
microphone.
deactivate QUIET mode. Ì
While entering numbers or
names, press to delete a digit
Ì
Press to make or answer a home or
or character.
cell call using the speakerphone.
Ì
Press to delete the message
currently playing.
Ì
MUTE/DELETE During a call, press to mute the
Ì
Press twice to delete all
microphone.
previously reviewed messages
Ì
While entering numbers or names,
when the telephone is not in
press to delete a digit or character.
use.
Ì
While reviewing caller ID log,
Ì
/ REPEAT During message playback,
directory, redial memory, allow list,
press to repeat a message
block list, or star name list, press to
or press twice to play the
delete an individual entry.
previous message
Ì
REDIAL/PAUSE Press repeatedly to view the last
Ì
/ SKIP During message playback,
ten numbers dialed.
Ì press to skip a
While entering numbers, press and
hold to insert a dialing pause.
Telephone base
Ì Press to start or stop message
/PLAY/STOP
playback.
We recommend you program your telephone system
before use. The following are a few examples of common
Ì
CELL 1/CELL 2 Press to make or answer a cell
features to set before using the telephone. Refer to the
call.
Handset and telephone base settings and Answering
Ì
HOME Press to make or answer a system settings in the Complete user's manual for detailed
(Speakerphone) home call. instructions on setting all telephone features.
1 Ì
Press and hold to set or dial Date and time
your voicemail number.
/ Ì
Press to switch to tone dialing
TONE a>A Note: Set the date/time before using the answering system.
temporarily during a call if you
have pulse service.
Using a cordless handset or the telephone base:
Ì
While entering names, press
1. MENU ->
to change the next letter to
2. Enter the month (MM), day (DD) and year (YY) -> NEXT.
upper or lower case.
Ì 3. Enter the hour (HH) and minute (MM).
# Press and hold to enter the
QUIET/
QUIET mode setting screen, or
4. / -> AM or PM -> SAVE.
to deactivate QUIET mode.
Ì Basic answering system setup via
While the phone is idle, press
/ HANDSET
to page all handsets.
voice guide
LOCATOR
Ì You can follow the voice guide to record your own
MUTE During a call, press to mute the
announcement, set the number of rings and set the
microphone.
message alert tone.
Ì
While the telephone base is
Using a cordless handset or the telephone base:
ringing, press to silence the
1. MENU ->
ringer temporarily.
/ -> Voice guide -> SELECT.
2.
Ì
While in idle mode, press to
VOLUME
3. Set up the answering system by inputting the designated
adjust the base ringer volume.
numbers, as instructed.
Ì
During message playback,
press to adjust the listening
volume. Add a Bluetooth
VOICE Ì Press to activate the
To use a Bluetooth enabled cellular phone or headset
voice-controlled application of
with your telephone, you must first pair and connect your
connected cell phone.
Bluetooth cellular phone or headset with the telephone
Ì
MIC Microphone.
base.
Bluetooth wireless technology operates within a short range
Ì
PTT/FLASH Press to display the PTT menu
(up to 30 feet). Keep the connected device within 15 feet of
to begin a PTT call.
the telephone base for optimal performance.
Ì
Press and hold to begin a
To pair and connect a cell phone using the telephone
one-to-group broadcast when
base:
the telephone base is not in
1. MENU ->
use.
Ì 2. SELECT to select Add device.
During a call, press to answer
an incoming home call when 3. SELECT to select Add cellular.
you receive a call waiting alert.
4. Disconnect the cell phone from any Bluetooth device ->
Softkeys (2) Ì Press to select the menu item Press NEXT.
displayed above the key.
5. Place the cell phone next to the telephone base.
Ì
While in a menu, press to
6. Press NEXT
select an item, save an entry or
mode.
setting, cancel an operation, or
7. Turn on the Bluetooth feature of your cell phone and
back up to the previous menu.
search for or add new advices. Once your cell phone finds
Ì
CANCEL While in a menu, press to exit your AT&T phone (AT&T DECT 6.0), press the appropriate
without making changes or key on your cell phone to continue the pairing process.
press and hold to return to idle
Enter the cell phone passcode (typically 0000), if
f f
mode.
required ->Press SET.
Ì
Press and hold while the
Enter the PIN (default PIN: 0000) of the telephone
f f
telephone is not in use to erase
base into your cell phone, if required.
the missed call indicator.
Ì To pair and connect a headset using the telephone base:
REDIAL/PAUSE Press repeatedly to view the
last ten numbers dialed.
1. MENU ->
Ì
While entering numbers, press
2. SELECT
and hold to insert a dialing
3. / -> Add headset -> SELECT.
pause.
4. Disconnect your headset from any Bluetooth device ->
Ì Press to turn the built-in Press NEXT.
/ ANSWER ON
answering system on or off.
5. Set your headset to discoverable mode -> Press
6. Press
SELECT.
Enter the PIN (typically 0000) of your headset, if
f f
required -> Press NEXT.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use
of such marks by Advanced American Telephones and its parent, VTech Holdings
message.
Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
Basic initial settings
/ -> Set date/time -> SELECT.
/ -> Answering sys -> SELECT.
cell phone/headset
®
/ -> Bluetooth -> SELECT.
to turn on the telephone base discoverable
/ -> Bluetooth -> SELECT.
to select Add device.
NEXT.
/ to choose your headset, if required -> Press