Telephone Base Overview - AT&T BL102-1S Quick Start Manual

Telephone base overview

8
X/DELETE
/PLAY/
9
STOP
10
VOL
11
/SKIP
Initial basic settings
After you install your telephone or power returns following a power outage, the
handset and telephone base will prompt you to set the date and time. To skip
setting the date and time, press
Voice guide to set Smart call blocker and
answering system
After the date and time setting is done or skipped, the telephone base will prompt
if you want to set Smart call blocker. Press MENU/SELECT to start the Smart
call blocker setup via voice guide. To skip the setup, press CANCEL twice on the
telephone base.
After the Smart call blocker setting is done or skipped, the telephone base will then
prompt if you want to set up the answering system. Press MENU/SELECT to start
the answering system setup via voice guide. To skip the setup, press CANCEL on the
telephone base.
We recommend you program your telephone system before use. The following
are a few examples of common features to set before using the telephone. Refer to
the Handset and telephone base settings and Answering system settings in the
Complete user's manual for detailed instructions on setting all telephone features.
Press to delete the message currently playing.
Ì
Press twice to delete all old messages when the
Ì
phone is not in use.
Press to start or stop message playback.
Ì
Press to adjust the volume during message
Ì
playback.
While in idle mode, press to adjust the base ringer
Ì
volume.
Ì Press to skip to the next message.
OFF/CANCEL on the handset.
9