If desired, a thermostat may be installed to regulate the Quadra-Fire GB40-I. It is important to use a
thermostat designed for millivolt operation. Do not connect this appliance to a thermostat serving any other
appliance.
Manual Thermostat
Part #823-3880
Anticipator setting 1.2
Connect the thermostat wires to the two center screw terminals on the lower right side of the unit.
When installed, it will be behind the panel trim set. Turn off the manual switch located on upper right
corner of the panel trim set.
A remote control or a wall switch may be wired to the thermostat terminals. Contact your Quadra-Fire
dealer or service person for details (see page 29 for part number).
Page 16
GB 40 I - FIREPLACE INSERT
THERMOSTAT INSTALLATION
OPTIONAL THERMOSTAT
REMOTE CONTROL
Electronic Setback Thermostat
Part #811-0520
Thermostat connection block
Switch connection plug connector
March 2000