Gehl RT250 Parts Manual page 39

Item
No. Part No. Description
01 WELDMENT, REAR BILL *
50303655 Refer to the illustration below
50301820 Refer to the illustration below
02 195660 FILTER, FRESH AIR
03 275598 COVER, FRESH AIR FILTER
04 654004 FW 5/16" AWZY
05 650484 CS 5/16" x 1/2" C5ZY
06 271627 SEAL, FOAM SIDE
07 275601 PAD, HOUSING TOP
08 275599 PAD, HOUSING LH
09 275600 PAD, HOUSING RH
10 187030 DRIP CAP **
11 244815 HOSE, MENDER 1/2" HOSE **
12 50303658 HOSE/HVAC DRAIN 0.5 X 30 IN. **
13 50303658 HOSE/HVAC DRAIN 0.5 X 30 IN. **
14 50303692 GROMMET, .75ID .125GW 1.0GD ** 2
(2) Drain Tubes
50303655
Printed in U.S.A.
REAR CAB - HVAC COVER
Item
Qty.
No. Part No.
1 15 245235 CLAMP/HOSE WIRE .75 OD **
16 650488 CS 3/8" x 3/4" C5ZY
17 65049 FW 3/8" ANZY
1 18 274788 SEAL, FOAM
1 19 50301824 SEAL, FOAM TOP
20 135270 WASHER, SEALING 3/8"
2
21 650490 CS 3/8" x 1" C5ZY
2
2
1 *
IMPORTANT: When ordering a replacement rear bill
1
weldment be sure to determine which one to order.
1
Earlier units use weldment PN 50301820, which has
2
three drain holes drilled into the bottom plate . Later
2
units use weldment PN 50303655, which has two
1
drain tubes that use items 10-14, and item 18.
1
** Not used with earlier rear bill weldment 50301820.
(drilled in bottom of weldment)
37
RT250 - CAB
Description
(3) Drain Holes
50301820
913364/BP0314
Qty.
2
4
4
1
1
5
5