Gehl RT250 Parts Manual page 105

30
31
34
30
35
36
37
38
Top of Hydraulic Tank
HOSE CONNECTION:
#13 connects to T1 on Pilot Pressure Manifold
#17 connects to hydraulic pump
#18 connects to hydraulic cooler (upper port) — connects to
steel tube on early machines or directly to the cooler
on later machines.
#20 connects to auxiliary hydraulics (loader arm left side)
#21 connects to hydraulic main valve (bottom TEE)
#23 connects to "TEE" on right side drive motor
#29 connects to High-Flow hydraulics (loader arm right side)
#42 connects to hydraulic cooler (upper port) **
Printed in U.S.A.
(Early-Style Tank - identified by vent system and fill plug #6)
32
Hydraulic Tank
Vent System
33
36
3
RT250 - HYDRAULIC SYSTEM
Item
No. Part No.
01 50302527 WELDMENT, HYDRAULIC TANK
02 139438 CS FL LOCK 3/8" x 5/8"
03 194180 90 HB06-MAORB06
04 131913 BUMPER
05 653034 HLN 5/16" C2ZY
06 271689 PLUG, -24 (hydraulic oil fill)
07 274125 O-RING (included with item 6)
08 131577 PLUG MORB10
09 055898 O-RING (included with item 8)
10 131522 PLUG MORB12
11 048953 O-RING (included with item 10)
12 055064 45 MJ12-MAORB12
13 50301262 HOSE, MP12 x 75 IN.
14 230-32412 ADAP., MAORB20-BARB
15 077970 O-RING (included with item 14)
16 193743 CLAMP, T-BOLT 1.75 IN.
17 50301897 HOSE, LP 20 x 88.0 IN. (suction)
50300818 GUARD, POLY HOSE (not shown)
18 137599 HOSE, MP12 x 26.0 IN. (Std. Hyd.)
19 055064 45 MJ12-MAORB12
20 273867 HOSE, MP 6 x 74.0 IN.
21 50301382 HOSE, MP4 x 67.0 IN.
22 079026 45 MJ06-MAORB06
23 273907 HOSE, MP8 x 49.0 IN.
24 076880 45 MJ08-MAORB08
25 134756 SIGHT PORT (oil level)
26 274125 O-RING (included with item 25)
27 122778 PLUG, MORB06 (stnd. hydraulics)
28 068938 ADAP., MJ06-MAORB06
29 274114 HOSE, MP 6 x 110.0 IN.
30 071700 LN 1/4 CBZY
31 50302525 BREATHER
32 651086 CB 1/4" x 1" C5ZY
33 650758 CB 1/4" x 3/4" C5ZY
34 50302530 BREATHER STANDPIPE
35 50301160 ST HB06-MORB06
36 087852 HOSE CLAMP #06
37 50302537 HOSE, FUEL 3/8" x 16"
38 L71042 CLAMP, VINYL 0.50" x 0.28"
42 50302969 HOSE, MP 16 x 56 " *
47 088117 90 MJ16-FJS16 *
48 054818 ST MJ16-MORB12 *
* Used when machine is equipped with high-flow
hydraulics option on early-style machines.
NOTE: Be aware when ordering items 18,19, 42,
47, and 48 that early- and late-style machines used
different hoses and fittings. For additional informa-
tion, refer to the hydraulic cooler shown on pages
72 and 74.
103
HYDRAULIC TANK
Description
913364/BP0314
Qty.
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1