Table of Contents
Advertisement
e. MounT TraCk To The STaIrCaSe
Note: These instructions are for mounting to a standard
wood staircase. For installation on hard surface
stairs, anchors may be needed and different screws
may be required.
position the track on the staircase with the bottom side
of the track resting across the stair nosings, the lower
track end cap resting on the lower landing, and the
back side of the track 3 ½" away from the wall or other
obstructions, such as the power supply. If installing a
citia silver or aveya premier this distance will need to
increase to 6 ¼" to accommodate the wider seat.
Note: This distance is needed for clearance of the seat
back in the riding and swivelled position.
attach the track to the staircase with track mounting
brackets. The brackets attach to the stair treads
with wood screws. locate one bracket at each of
the following positions:
1st tread at the bottom of the
stair
Tread below the top landing
Tread above a track splice
Tread below a track splice
center of each section of track
Track mounting
bracket
snap on the track mounting bracket covers.
lightly lubricate the entire length of gear rack.
Lubricant is provided in the small parts kit.
Track
/
-18 T-bolt
5
16
into slot in bottom of track
7
Hide quick links:
Advertisement
Table of Contents
