Table of Contents
Advertisement
q. adJuST SeaT heIghT IF deSIred
loosen the allen screws on the two seat clamps.
slide the seat up or down as desired and tighten
the screws.
Install the front seat mounting cover into position.
r. reMoTe ConTrol label
apply the appropriate directional label to the face of
the remote control, depending upon whether it is a
right hand or left hand installations. Confirm direction
of remote buttons first.
Note: Refer to Step C of the Service Information for in-
structions on changing the frequency of the remote
control.
S. VelCro pendanT ConTrol
apply one side of Velcro to back of pendant control and
the other to the unit, so pendant will adhere to the unit.
placement of pendant control is up to the customer,
Thyssenkrupp access recommends the arm of the
unit. Velcro will hold pendant to unit when unit is not in
use.
16
T. ChangIng The orIenTaTIon oF The
pendanT holSTer
The citia and the aveya come with a pendant holster
attached under the armrest.
The pendant holster comes
from the factory already
attached, however, you may
need to change which side
the holster is attached to for
the comfort of the user.
The holster attaches in one
of two ways depending on
which model of stairlift you're
installing.
option 1: There are two screws under the armrest which
attach the armrest to the chair arm. undo these screws,
remove the holster, reattach the armrest and install on the
other side.
Pendant Holster
Right-Hand arm of stair lift
pendant holster
with pendant
pendant holster
Armrest
Hide quick links:
Advertisement
Table of Contents
