Completion Procedures; Completion Checklist; Before Leaving The Jobsite - ThyssenKrupp Access Citia Installation And Service Manual

IV. CoMpleTIon proCedureS
a. CoMpleTIon CheCklIST
The following features must be verified as operational
before the stair lift can be released for use:
Upper and lower limits: Verify the lift stops auto-
matically at the top and bottom of the track.
Final limits: Verify the lift is inoperable in both direc-
tions when each final limit switch is pressed.
Running Clearance: Verify the lift clears all obstruc-
tions.
Track Mounting Brackets: Verify all track mounting
brackets are securely attached to the stair treads, the
track and at the pivot points.
Track Splice: Verify track joints are smooth and free
of burrs and gaps.
Gear Rack: Verify the gear rack is sufficiently lubri-
cated.
Track End Covers: Verify the track end covers are
securely fastened to the track.
Track: Verify the inside of the track is free of foreign
objects.
Chassis Rollers: Verify the chassis roller axles
have been lubricated.
Footrest:
Verify the footrest clears all stair nosings.
Verify the lift stops when the footrest runs into
an obstruction.
Verify the footrest folds up and stays in the up
position.
Verify the unit does not beep when it stops at
the upper and lower limits. The unit will beep if
stopped and not on the charging strip
18
Seat:
Verify the seat is level.
Verify the seat swivels 70° towards each land-
ing and locks into position.
Verify the lift will not operate when the seat is
not locked in the riding position.
For optional folding seat: Verify the seat will
fold up and stay in the up position.
Verify the seat belt works properly.
Clean Up: Verify the lift is free of all grease, dirt, etc.
b. beFore leaVIng The JobSITe
The following should be completed before leaving the
jobsite:
clean up work area.
assist customer on orientation ride.
Demonstrate proper operation, lubrication and
maintenance to the user of the lift and other fam-
ily members at the residence.
Give customer a copy of the owner's manual for
reference. please take time to insert your business
card or write your company name, address and
telephone number inside the owner's manual in the
area provided.
Assist the owner in filling out the warranty card with
date of installation