Sleep Mode; Ride Data Reset; All Clear Total Reset - Vetta V100 User Manual

RIDE DATA RESET

To reset current ride data (DST, RT, TT, AVG & MAX SPD, AVG/MAX
CAD*, MAX/MIN TMP, STP, IDS), make sure the timers (RT/TT) are
turned off and press Button #3 for 2 seconds in any primary
screen mode except STP/IDS.
*(optional)

ALL CLEAR TOTAL RESET

All data entered in Setup, as well as all accumulated ride data, can
be cleared by performing an All Clear Total Reset. To clear the
computer, press all three buttons simultaneously and hold for 5
seconds in any screen mode. When the computer is reset, the
master screen will appear and show all LCD segments for 3
seconds. The computer will then automatically enter Initial Setup
mode to be reprogrammed.

SLEEP MODE

To conserve battery life, the V100 computer is
programmed to enter a Sleep Mode after
receiving no input from buttons, wheel motion
or cadence for 5 minutes. In this mode, the V100
screen displays only the time of day. The
computer exits Sleep Mode automatically when
it receives input from buttons or wheel/crank
motion* and then returns to the screen last
displayed. Clock, Stopwatch and Total Time (for
the ride) continue to run during the Sleep
Mode.
*(wired version only)