Camera Name; Pan/Tilt Camera Setup - JVC VR-609 Instructions Manual

5.1.2.2 Camera Name

● Name : Possible to create an alphanumeric nickname of up to 16 characters
(including symbols) as shown below.
You can see the next character repeatedly by using Jog.
Character Mark
Blank ! " # $ % & ' ( ) " + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ?
@ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
[ ＼ ] ^ _ ' a b c d e f g h I j k l m n o p q r s t u v w x y z { | } ~
How to Use
1) Selects Name by Jog.
2) Possible to write and amend if you press the ENTER button.
3) Writes and amends by using the RIGHT/LEFT button and Jog.
4) Complete by clicking the ENTER button.
!
It is NOT possible to display all the characters when the screen is divided into more than
6 pictures. In this case "..." is displayed.

5.1.2.3 Pan/Tilt Camera Setup

● Camera Setting : Camera ID, Reverse Pan, Reverse Tilt, Control Test
1) Camera ID : For controlling the Pan/Tilt camera.
Setting ID is for distinguish the Pan/Tilt camera, which is connected in parallel.
Camera ID uses 1~255 number.
( Be sure to check the specifications of the Pan/Tilt cameras. )
2) Reverse Pan, Reverse Tilt : It reverses a Pan/Tilt Camera direction.
Usually, the Pan/Tilt direction can be changed depending on the location
and mounting of the Pan/Tilt camera.
3) Control Test : Possible to test whether Pan/Tilt Camera setup is correct or not.
Useful when checking after setup finishes.
-- 43 --
JVC VR-609