JVC VR-609 Instructions Manual page 53

(10) Press right button, and move the specific block.
(11) Press display button, and a yellow bar will be displayed on the left-hand side of a
specific block.
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
１
(12) Once again, press display button, and a yellow bar will be displayed on the right-
hand side of 23 (23:59).
(13) Press left button, and move it to the position of 18. Press display button, and a
yellow bar will disappear.
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
１
(14) By the above procedure, schedule setup has completed. Moreover, this state
seems that one day is divided into five blocks. If a block is chosen with a right/left
button and an ENTER button is pressed at it, a record setup of each block can be
set-up freely. However, mind that a boundary line will disappear if an adjacent
block is set to the same setup.
● If press the ENTER button as block is selected, the below picture (Recording Events)
will be displayed then possible to set-up recording option for selected channel.
● The way of setup is the same with Manual Recording.
● After finish setup, press the EXIT button then it is returned to Manual Recording menu.
!
Please do not set-up a channel without video input as record. Please remove all
checks such as Always, Alarm, and Motion.
● As press the ENTER button at the QL, possible to set-up Recording Quality
like above picture.
● Set-up range : 1 ~ 7. (Default setting : 5)
(1=Low, 7=the Highest.)
● After finish setup QL and each channel, press the EXIT button for out of menu.
-- 53 --
JVC VR-609