How To Setup - JVC VR-609 Instructions Manual

Jvc digital video recorder instructions

Hide thumbs Also See for VR-609:

Table of Contents

5.2.2.2 How to Setup

● Recording Schedule is set-up in block. Minimum block is an hour.

A time setting cannot be performed from the remote control unit. Please use

the front panel buttons.

● How to Setup Recording Schedule Block

1) As using left/right direction button, designates time block at the same channel.

As using up/down direction button or jog, designates channel block at the time

zone of 0 hour.

2) As pressing 'DISPLAY' button at the block to change, the following picture will

display in order.

１

3) As pressing the left button in case yellow bar is at the left of the block :

The block extends for an hour and extended time is set-up as Recording

Schedule of present block.

１

When the yellow bar is located in the left side of the block and you press the

right arrow button, then the source configuration in the block will be

deleted (reduced) and the configuration in the deleted block will follow the

configuration in the left block. (But, if the current block is located in the most left

side, then the configuration of deleted block will follow the default setting.)

１

-- 51 --

● Appears yellow bar at the left of block.

● Appears yellow bar at the right of block.

● Disappears yellow bar at the block.

JVC VR-609

Table of Contents

Vr-609u - 9 channel digital video recorder