Preparation Of Installation - JVC VR-609 Instructions Manual

2.3 Preparation of installation

■ Putting on a level place
(1) Attach rubber feet.
- Attach 4 rubber feet in the bottom surface of the equipment with 4 screws provided (M3 x
11mm).
■ Mounting to a Rack
(1) Assemble 2 rack-mounting brackets
- Fasten the rack-mounting handle to the rack-mounting angles using 2 screws provided
(M4 x 10mm). Assemble 2 brackets in the same procedure.
(2) Remove 8 screws
- Remove the 8 screws at the right and left side surface of the equipment. (M4 x 12mm).
(3) Mount the rack-mounting bracket to the equipment
- Fasten 2 rack-mounting bracket (Assembled in the procedure (1) ) to the equipment
using 8 screws ( Removed in the procedure (2) ).
(4) Mount the equipment to the Rack
Provided screws
For rack-mounting angle
M4 x 12mm (4 EA)
(attached to the equipment
previously)
For rubber feet
M3 x 11mm (4 EA)
-- 20 --
JVC VR-609
For rack-mounting
handle
M4 x 10mm (4 EA)
For removable HDD
M3 x 8mm (4 EA)