Date/Time Setup - JVC VR-609 Instructions Manual

5.7.7.2 Date/Time Setup

● Set-up Date and Time, which will be used in the system.
● Set-up "Date Display".
● How to Setup
1) Move to the place you want to change the setup by using up/down buttons
or Jog.
2) Select contents to change by using the ENTER button.
3) Select the place to change by using the right/left button.
4) Select the number you want by using Jog.
Date (year/month/day)
Time (hour/minute/second) : ______.______.______
5) Select the type of display.
y/m/d m/d/y d/m/y
(Default setting is m/d/y (VR-609U) or d/m/y (VR-609E) )
6) Setup contents are automatically applied if you move to a previous menu.
!
When the "system time" is changed and then the same time image was
recorded, The Playback image is performed in the recorded order. On
the searches mode, it should jump to the designated time out of two
recorded images.
: ______.______.______
-- 79 --
JVC VR-609