Installation And Preparation; System Connection (When Connecting 16 Cameras) - JVC VR-716E Instructions Manual

Installation and Preparation

System Connection (When Connecting 16 Cameras)

Connection with up to 16 cameras is possible with VR-716's switcher.
<Example>
• Perform recording/playback by connecting to 16 cameras.
• Checking recorded images at Monitor 1 and live camera images on Monitors 2 ~ 5 at the same time.
• Execution of alarm recording upon receiving signals from the alarm sensor.
Camera 1
Camera 2
Camera 16
External Hard Disk
Drive
Control (Communication) Terminal
AC 220 V - 240 V Output
AC 220 V - 240 V
Output
UPS
Caution
• Do not connect CCU's [CAMERA INPUT] to VR-716's [VIDEO IN]. Doing so may damage the input circuit of VR-716.
• When this equipment is connected to CCU, "NO VIDEO IN ** INPUT (E-03)" will be displayed on the screen if error occurs
during signal input. (** indicates the Camera No.) Recording cannot be properly performed in such a state at both the camera
for which error has occurred as well as at other properly functioning cameras. In this case, set the REC MODE of the camera
channel for which error has occurred to "OFF" on the menu, and eliminate the cause of the error immediately.
☞ Page 24 'REC MODE Menu'
• Turn OFF the power of all devices before connecting or disconnecting.
• For channels that are not connected to cameras, set them to "OFF" on the "REC MODE" Menu. ☞ Page 24 'REC MODE Menu'
• When [THRU OUT] is connected with the [BNC] connector, the built-in 75 ¸ terminal will be left OPEN. In this case, connect
a 75 ¸ terminal to the last device.
• For connection of devices other than VR-716, please refer to the respective instruction manuals for details.
• Please refer to Page 73 'Connecting to a PC' for connection with computers.
14
AUDIO IN
1 2 3 4 5
VIDEO IN
THRU OUT
SCSI
AUDIO OUT
LAN
1 2
RS-232C UPS
[AUDIO IN]
Monitor 1
Computer
AC 220 V - 240 V
Notes
• Please consult the sales outlet from which this equipment is purchased on the type of UPS
units that are compatible with this equipment.
• Consult the outlet from which this equipment is purchased on the types of usable external
HDDs.
6 7 8 9 10 11 12 13
CAUTION
VIDEO OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1 2
AVIS:RISQUE DE CHOC
ELECTRIQ
1 3 5 7 9 11 13 15 RST COM IN
CLK
2 4 6 8 10 12 14 16 OUT RST
WAR
ALARM OUT OUT
[ALARM IN] [COM]
[VIDEO IN]
Alarm Sensor
14 15 16
1 4/ 16 5 8
AC IN
(220V–240V )
SIGNAL GND
IN EXT REC
SER
9 12 13 16
REC
COM
OUT EE OUT
Power Cord
(Supplied with this equipment)
[VIDEO IN]
Monitor 2 Monitor 3 Monitor 4
AC 220 V - 240 V
50 Hz/60 Hz
Monitor 5