Changing the bulbs for fog lights
Fig. 130 Front bumper: Protective grille/removing the fog light
ä
First read and observe the introductory information and safety warn-
ings
on page 159.
Removing the protective grille
›
Remove the protective grille by inserting the clamp for removing the wheel
trims at the location
» Fig. 130
- indicated by the arrow
tool kit.
›
Remove the protective grille in the direction of the arrow
Changing light bulbs for fog lights
›
Use the screwdriver from the tool kit to unscrew the fog lamp
›
Remove the fog lamp in the direction of the arrow.
›
Remove the connector.
›
Turn the bulb holder
» Fig. 131
A
and remove.
162
Do-it-yourself
Fig. 131
Replacing the light bulb
» page
145, Vehicle
» Fig.
130.
» Fig. 130
in an anti-clockwise direction up to the stop
›
Insert the bulb holder into the lamp and turn in a clockwise direction as far as
the stop.
›
Fit the connector.
›
Replace the fog lamp by inserting it in the opposite direction of the ar-
row
» Fig. 130
- and tighten.
›
Insert the protective grille and carefully press it in. The protective grille must
engage firmly.
Changing the bulb for the licence plate light
Fig. 132 Remove the number plate light/replace the bulb
ä
First read and observe the introductory information and safety warn-
ings
on page 159.
›
Open the boot lid.
›
Insert a flat screwdriver at the location indicated by the arrow
press it in lightly, and unlatch the springs.
›
Remove the lamp.
›
Pull the faulty bulb out of the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Replace the lamp and lightly press it until the spring latches.
- .
Ð
» Fig. 132
- ,
» Fig. 132
- .
Ð