Skoda Rapid Owner's Manual page 15

Selecting functions
›
Briefly press the rocker switch
A
functions of the multi-functional indicator one after the other.
Reseting
›
Select the desired memory.
›
Press the button » Fig. 5 for longer.
B
The following readouts of the selected memory will be set to zero by button
›
Average fuel consumption
›
Distance driven
›
Average speed
›
Driving time
Multi-function display details
ä
First read and observe the introductory information and safety warn-
ings on page 11.
Outside temperature
The current outside temperature is shown in the display.
If the outside temperature drops below +4 °C, a snow flake symbol (warning sig-
nal for ice on the road) appears before the temperature indicator and an audible
signal will sound. After pressing the rocker switch
tion which was shown last is indicated.
Driving time
The driving time which has elapsed since the memory was last erased, appears in
the display. If you want to measure the driving time from a particular moment in
time on, at this moment, reset the memory to zero by pressing the button
» Fig. 5 » page 12.
B
The maximum time indicated in both memories is 19 hours and 59 minutes and on
vehicles which are fitted with an information display, it is 99 hours and 59 mi-
nutes. The indicator is set back to zero if this period is exceeded.
1) On some models in certain countries, the display appears in kilometres/litre.
2)
On some models in certain countries, - -.- km/ltr. is displayed when the vehicle is stationary.
» Fig. 5 up or down. This opens the individual
» Fig. 5 » page 12, the func-
A
Current fuel consumption
The current fuel consumption level is shown in the display in litres/100 km
can use this information to adapt your driving style to the desired fuel consump-
tion.
The display appears in litres/hour if the vehicle is stationary or driving at a low
speed .
2)
: Average fuel consumption
B
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km » page
1)
To determine the average fuel consumption over a certain period of time, set the
memory at the start of the new measurement to zero using button
Ð
» Fig. 5 » page 12. After erasing the memory, no value appears in the display
B
until you have driven approx. 300 m.
The display is updated regularly while you are driving.
Range
The estimated range in kilometres is shown on the display. It indicates the dis-
tance you can still drive with your vehicle based on the level of fuel in the tank
and the same style of driving.
The display is shown in steps of 10 km. Once the fuel gauge pointer reaches the
reserve marking, the range is displayed in 5 km.
The fuel consumption over the last 50 km is used to calculate the range. The
range will increase if you drive in a more economical manner.
If the memory is set to zero (after disconnecting the battery), the fuel consump-
tion of 10 ltr./100 km is calculated for the range; afterwards the value is adapted
accordingly to the style of driving.
Distance travelled
The distance travelled since the memory was last erased is shown in the dis-
play » page 12. If you want to measure the distance from a particular point, reset
the memory to zero by pressing the button
The maximum distance indicated in both memories is 1,999 km or 9,999 km on
vehicles with an information display. The indicator is set back to zero if this period
is exceeded.
12.
» Fig. 5 » page 12.
B
Instruments and Indicator Lights
. You
1)
£
13