Honeywell Ademco Vista-48LA Installation And Setup Manual page 49

Entd A022-4063
Rcvd A022-4064
YOU MUST
ON
PROGRAM
THIS BUTTON
LOOP 4
ENROLL AS "BR"
5804 Wireless Key Transmitter
For 5804
TEMPLATE 1 Loop
1
2
3
4
TEMPLATE 2 Loop
1
2
3
4
TEMPLATE 3 Loop
1
2
3
4
Not Confirmed
[∗] to continue
Wireless Key Predefined Default Templates
LOOP 3
OFF
LOOP 2
LOOP 1
5 8 0 4 - 0 0 1 - V 1
Function Zone Type
No Response 23
Disarm 22
Arm Away 21
No Response 23
Function Zone Type
No Response 23
Disarm 22
Arm Away 21
Arm Stay 20
Function Zone Type
24-hour audible 7
Disarm 22
Arm Away 21
Arm Stay 20
If the serial number transmitted does not match the serial number
entered, a display similar to the one shown will appear. If the loop
number does not match, it will also be displayed.
If so, activate the button on the wireless key once again. If a match is
not obtained (i.e., summary display does not appear), press the [#]
key and then enter the correct serial number.
If the serial number transmitted matches the serial number entered,
the keypad will beep 3 times and will return you to step 8 to enter the
starting zone for the next wireless key.
NOTE: Following the successful enrollment of each wireless device,
remove ONE of the serial number labels from the device and affix it
in the appropriate column on the ENROLLED TRANSMITTERS
worksheet of the Programming Form; then enter the other
information (zone number, zone type, loop number, etc.) relevant to
that device.
RED/YELLOW
LED
LOOP 3
ENROLL AS "BR"
5804BD 2-Way Wireless Key Transmitter
For 5804BD
TEMPLATE 4 Loop
TEMPLATE 5 Loop
TEMPLATE 6 Loop
GREEN/YELLOW
LED
LOOP 2
LOOP 4
(YOU MUST
PROGRAM
THIS BUTTON)
LOOP 1
•
• •
• • •
• • • •
• •
•
•
Function Zone Type
1 No Response
2 No Response
3 Arm Away
4 Disarm
Function Zone Type
1 No Response
2 Arm Stay
3 Arm Away
4 Disarm
Function Zone Type
1 24-hour audible
2 Arm Stay
3 Arm Away
4 Disarm
5 8 0 4 B D - 0 0 7 - V 0
23
23
21
22
23
20
21
22
7
20
21
22
5-7