Piston Installation; Cylinder Installation - Honda TRX70 Fourtrax 1986 Service Manual

Clean the cylinder gasket surface being careful not to drop any
gasket material into the crank.case.
PISTON INSTALLATION
Apply molybdenum disulfide grease to Inside of the connecting
rod amall end.
Install the piston, piston pin and clip .
NOTE
Install
the
piston with the ... .. marX facing the exhaust
side.
Do
not align the piston pin clip end gap with the piston cut·
out.
CYLINDER INSTALLATION
Install the dowel pins. new a-ring and 8 new gasket.
Apply 8 thin coat of engine oil to the piston rings and cylinder
wall.
Install
the
cylinder, compressing the piston rings.
NOTE
• When the cylinder is halfway over the piston,
foute
the carn
chain through the cylinder.
CYLINDER/ PISTON
7-5