Kingpin Bushing Inspection; Steering Shaft Removal; Bushing Inspection; Steering Shaft Inspection - Honda TRX70 Fourtrax 1986 Service Manual

FRONT WHEEl/BRAKE/STEERING SYSTEM
KINGPIN BUSHING INPSECTION
Check the kingpin bushings for
weBr
or damage .
Measure the 1.0. of the bushings.
SERVICE UMfT:
Upper: 15.69 mm (0.6181n1
Lower: 17.19 mm (0 .677 Inl
STEERING SHAFT REMOVAL
Remove the following parts:
- handlebar (page 11· 31.
- front fender (page 13-1 L
- steering shaft nut
boot,
cotter pin and nut.
- cotter pins and bushing holder nuts and bushing holder.
- steering shaft with bushing.
Remove the bushing from the shaft.
BUSHING INSPECTION
Inspect the bushing for wear or damage. replace if necessary .
Measure the bushing 1 .0 .
SERVICE LIMIT : 22 .S mm 10.90 inl
STEERING SHAFT INSPECTION
Inspect the steering shaft for damage or cracks. and replace if
necessary .
Measure the steering shaft 0 .0 . in the location of the bushing .
SERVICE LIMIT: 22.0 mm 10.87 inl
11-18
11' BUSHING
HOLDER
(, I
STEE~ING
SHAFT
(2) STEERING
SHAFT