Honda TRX70 Fourtrax 1986 Service Manual page 102

TRANSMISSION/CRANKSHAFT
Install a new countershatt oil seal.
Check the neutfal indicator shaft oil seal.
If
it
is damaged, or if
it
was removed during disassembly, in-
stall a new seal and washer.
Check the gearshift spindle oil seal and repla ce if it is neces-
sary.
ASSEMBLY
Coat all parts with clean engine oil.
Assemble the transmission shafts and gears noting the loca-
tions of the thrust washers and snap rings.
NOTE
Make sure the snap rings are seated properly.
(1)
C4 GEAR (24T)
()o8OOI}
r
171 M2
~EAR
(16T) (6) M"iN"H"FTI M1 GEAR 111T)
(9) M4 (23T) (8) M3 GEAR (20T)
Install the shift forks in the original positions from which they
were removed.
10-6
(1)
RIGHT
SHIFT FORK
~~
/ (5) GUIDE PIN
(6) GUIDE PIN CUP
(2) lEFT
SHIFT FORK
(3) SHIFT DRUM
NOTE
(4) NEUTRAL SWITCH
ROTOR
• Bend the tab of the rotor into
the
drum.
•