Honda TRX70 Fourtrax 1986 Service Manual page 61

Install the cvlinder head cover with the arrow facing down (ex-
haust pipe side).
NOTE
Be sure to install the washers, copper washer, cap nuts and
nut on the cylinder head cover 8S shown.
Tighten the cylinder head cover nuts in 8 criss-cross pattern in
2
or
3
steps.
TORQUE : 9 - 12 N·m (0.9 - 1.2 kg-m . 7-9 ft-Ibl
Tighten the cylinder head bolt.
TORQUE: 10- 14 N·m 11.0-1.4 kg-m. 7-10 ft-lb)
Tighten the cylinder mounting bolt.
TORQUE: 10 - 14 N·m 11.0-1 .4 kg-m. 1-10 ft-Ibl
Install the intake pipe mounting bolts.
Turn the flywheel counterclockwise and align the T mark with
the index mark.
Place the cam chain over the carn sprocket aligning the O-mark
on the cam sprocket with the index mark on the cylinder head.
Install the cam sprocket.
Hold the flywheel and tighten the cam sprocket bolts.
TORQUE: 5-S N·m (0.5-0.S kg·m. 4-7 ft·lbl
CYLINDER HEAD/vALVES
(21 CAP NUTS
(11 COPPER
6-13