Honda TRX70 Fourtrax 1986 Service Manual page 59

Install t he valve cotters while compressing the valve springs
with valve spring compressor.
To prevent/ension loss, do nOI compress the valve springs more
Ihan n«eSSQry to instafltke !.'o/lle cotters.
TOOL:
Valve spring compressor 01757 -0010000 or
07957 -3290001
Valva spring compressor attachment 01959 - KM30100
Tap the valve stem gently with 8 soft hammer to seat the valve
cotters firmly.
CAUTION
Support the cylinder head abow the work bench surface to pre-
vent possible valve damage.
Install the camshaft aligning the cam tobes with the cylinder
head cutouts.
Apply a t hin coat of engine oil to the rocker arm shafts.
Install the rocker arms and shafts with the threaded ends
facing out .
Make sure the O-rings are properly seated in the grooves of the
valve inspection hole caps .
Install the valve inspection hole caps.
TORQUE: 10- 14 N·m 11.0-1.4 kg-m. 7 - 10 ft-Ibl
Install the cylinder head side cover with a new gasket.
CYLINDER HEADIVALVES
J
(1) CYLINDER HEAD CUTOUTS
(1)
CYLINDER HEAD SIDE COVER
6-11