Pre-Drive Inspection - Honda PIONEER 2022 Owner's Manual

Table of Contents

Advertisement

Is Your Vehicle Ready to Drive?

Pre-drive Inspection

Check the following items before driving your Honda SXS:
Oil Level
Check the engine and sub-transmission oil levels and
add oil, if needed (pages 166, 176). Also check under
the vehicle for leaks.
Coolant
Check the coolant level (page 185). If it is low, add a
50/50 mixture of silicate-free coolant and distilled
water.
Check for leaks.
Fuel Level
Check the fuel gauge (page 33) and add fuel, if
needed (page 161). Make sure the fuel fill cap is
secure. Also check for the smell of fuel or fumes - if
you smell any fuel, turn the ignition switch to OFF (w)
immediately, and see your dealer.
Brake Fluid
Check the level (page 211). If it is near MIN, check the
brake pads for wear (page 213). If the brake pads are
within the specification, check for leaks in the braking
system (page 210).
Tires
Check the air pressure of all tires and inflate them to
the proper pressure (page 217). Also inspect the tires
for damage or excessive wear (page 219). If necessary
see your dealer.
Wheels
Make sure the wheel nuts are properly tightened and
the wheels are not cracked or deformed (page 224).
Driveshafts
Inspect the driveshafts and boots for damage, tears, or
leaks and see your dealer if any are found.
104
Before Driving

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sxs1000m3Sxs1000m5

Table of Contents