Expression Parameters - Speedtouch IPQoS Configuration Manual

5.5.1 Expression parameters

Parameters explained
Name
Type
Intf
Intfgroup
E-NIT-CTC-20041213-0013 v0.5
In this section we will explain the parameters, used to define an expression, in more
detail.
name value
string
type value
intf
ip
serv
Depending on the selection of the type, the rest of the parameters is limited.
!
Only parameters that apply to the selected type will be available.
The following three parameters are used when selecting intf as type for the
expression.
intf value
ipoa, pppoe,
localnetwork, etc
intfgroup value
wan
local
lan
number
Description
Any given name to identify the expression.
Description
Use this type to define an expression that is related to
an interface.
Use this type to define an expression that is related to
an ip address.
Use this type to define an expression that is related to
a service.
Description
The IP interface name to which the expression is
related.
Description
Select this value to relate an expression to data
coming from the internet.
Select this value to relate an expression to data for
internal modem use only (loopback, OBC).
Select this value to relate an expression to data from
the LAN.
A number can be used to select the interface group to
relate an expression to. (WAN=0,Local=1 and
LAN=2)
Chapter 5
Packet Classification and Labelling
53