Speedtouch IPQoS Configuration Manual page 110

Chapter 8
Scenario 2: Business user with TOS marking.
108
A third rule needs to be defined for Management. This rule will be used for
management packets using the IKE protocol.
Click New.
1
You will now be able to add a new rule.
The following values need to be configured:
Set Index to 5.
1
Set Name to mngmt3.
2
Set Label to Management.
3
Set Service to ike.
4
Set Source interface to any.
5
Set Source IP to any.
6
Set Destination IP to any.
7
Set State to selected.
8
Click the Apply to add the rule to the QoS_user_rules list.
9
Click the Save All to save the newly added rules.
10
E-NIT-CTC-20041213-0013 v0.5