Rules Parameters Explained - Speedtouch IPQoS Configuration Manual

5.3.1 Rules parameters explained

Introduction
Chain
Index
Name
Clink
Srcintf
E-NIT-CTC-20041213-0013 v0.5
These are the parameters that can be used to define a rule.
We will now have a closer look at these parameters and explain what they are used
for.
Chain values
Chain name
Index values
number 0..255
Name values
String
Clink values
String
Srcintf values
DHCP-R_if_0, wan, lan,
local, _Internet, _lan1,
HTTPI_if_0, HTTP_if_0,
HTTPs_if_0, FTP_if_0,
TELNET_if_0, DNS-
S_if_0,
SNMP_AGENT_if_0,
PING_RESPONDER_if_0
Description
The name of the chain or subchain which contains the
rule.
Description
The list number of the rule. The lower the number the
higher the rule is placed in the list. This is of very high
importance since this will be the sequence in which the
are rules a checked.
Description
The name of the new rule.
Description
Name of chain to be parsed when rule applies.
Description
The name of the source interface expression.
Chapter 5
Packet Classification and Labelling
43