Advertisement
Port Status – Provide the status of a selected (highlighted) serial port.
The Poll Interval is the number of seconds between updates of this window. This is also the number of seconds
between each entry in the log file.
To create a log file, click the Start Logging button and enter a filename for the log file. This file will contain all of
the information displayed in the Port Status window until the Stop Logging button is clicked.
Refresh – Scan for ports. Note that NT 4.0 does not automatically scan.
The Version tab allows you to check the file information pertaining to the software.
The Advanced tab allows you to do the following:
Uninstall the drivers.
Enable Event Logging – Place event messages in system event log.
Configure how COM ports will be assigned.
Version Tab
Advanced Tab
Rapidport Installation Guide (90000665 Rev. C) – Page 8
Advertisement
