Brother FAX4750 Service Manual page 49

1.1 Rear Cover
(1) Remove the three screws (two "a" and one "b") from the rear cover. Screw "b" is provided on
those models available with a 2nd paper cassette (as an option or standard).
(2) Lightly pressing sections "X," pull out the rear cover.
1.2 Access Plates R and F
(1) Remove screw "c" that secures access plates R and F together to the main chassis.
(2) Remove screw "d" from access plate R.
(3) Take out access plates R and F together.
(4) Remove screw "e" to separate those access plates.
n n
Reassembling Notes
• When reinstalling access plate F, fit the two tabs provided on the front end underneath the
center edge of the main chassis.
"a" and "b": Screw, pan (washer) M4x10DB
"c," "d," and "e": Taptite, cup S M3x6
IV - 4
(Tightening torque: 50 N•cm)