Subsidiary Settings; Mode Set - JVC DR-M150SEK Instructions Manual

Jvc dvd video recorder instructions manual
Hide thumbs Also See for DR-M150SEK:
Table of Contents

Advertisement

Filename [M150SEK_10Subsidiary.fm]
M150SEK_00.book Page 60 Wednesday, June 15, 2005 4:04 PM

SUBSIDIARY SETTINGS

60
EN

Mode Set

Turn on the unit.
Turn on the TV and select an input mode such as EXT1.
Slide the TV/DVD switch to DVD.
AUDIO
Various modes of this unit are categorised into menus nested in
2 levels shown in the following table. To change the settings of
these modes, find the desired mode in the menu, then follow the
procedure below. (For details on each menu, see pages 60 - 61.)
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
The procedure below shows how to set the desired option of the
AXP MODE REC AUDIOB mode as an example.
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AFUNCTION SET UPB, then
press ENTER.
3
Press selection keys to
DVD SET UP
select ARECORDING
VIDEO IN/OUT RECORDING SET
SETB, then press
ENTER.
4
Press selection keys to
select AXP MODE REC
AUDIOB, then press
ENTER.
SET UP
5
Press selection keys to
select the desired
setting, then press ENTER.
6
Press SET UP to complete the setting.
TV
DVD
Selection Keys
(FGDE)
ENTER
SET UP
LANGUAGE SET (A pg. 19)
AUDIO OUTPUT (A pg. 60)
UTILITY (A pg. 67, 68)
VIDEO IN/OUT (A pg. 19, 57)
RECORDING SET (A pg. 61)
DISPLAY SET (A pg. 61)
OTHERS (A pg. 61)
CHANNEL SET (A pg. 64)
DTV SETTING (A pg. 20)
CLOCK SET (A pg. 66)
FUNCTION SET UP
INITIAL SET UP
DISPLAY SET
OTHERS
SAVE AS LIBRARY
ON
XP MODE REC AUDIO
DOLBY DIGITAL
DOLBY DIGITAL
LINEAR PCM
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT
Masterpage:Left0
* The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
DIGITAL AUDIO OUT
DOLBY DIGITAL/PCM /
^
8
PCM
/ PCM ONLY
Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUT] connector.
DOLBY DIGITAL/PCM
:
Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.
STREAM/PCM
:
Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
PCM ONLY
:
Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).
NOTE:
If you watch or play back a programme recorded on a DVD-RAM or
DVD-RW (VR mode only) disc which contains multiple audio
languages, select APCM ONLYB in advance and choose main or
sub audio with AUDIO.
ANALOG AUDIO OUT
STEREO
^
8
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
STEREO
:
Select this when listening to conventional two-channel stereo
audio with the unit's [AUDIO OUT] connectors connected to a
stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.
DOLBY SURROUND
:
Select this when listening to audio with the unit's [AUDIO OUT]
connectors connected to an amplifier/receiver with a built-in
surround decoder or a surround decoder.
D. RANGE CONTROL
NORMAL
^
8
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a
programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL
:
Normally select this setting to activate this function.
WIDE RANGE
:
Select this to deactivate this function when you enjoy
programme with wide dynamic range.
TV MODE
:
Select this when connecting to a TV. Even soft sound can be
well heard.
NOTES:
This function has no effect on programmes other than those
recorded in Dolby Digital format.
The effect of ANORMALB and AWIDE RANGEB may not be
different depending on discs.
OUTPUT LEVEL
STANDARD
^
8
You can lower the output level of analogue audio to accommodate
the unit to the connected A/V equipment.
STANDARD
:
Normally select this setting.
LOW
:
The output level of analogue audio is lowered.
STREAM/
/ DOLBY SURROUND
WIDE RANGE / TV MODE
/
/ LOW

Advertisement

Table of Contents
loading

Table of Contents