JVC DR-M150SEK Instructions Manual page 40

Filename [M150SEK_07Timer Recording.fm]
M150SEK_00.book Page 40 Wednesday, June 15, 2005 4:04 PM
TIMER RECORDING
40
EN
To Timer Record The Programme With The
Programmed Disc
1
Load a programmed disc.
2
Press DVD A to turn off the power.
●
appears on the front display panel, and the unit enters
into timer standby mode.
To disengage the timer mode, press DVD A again.
●
NOTES:
●
On-Disc Timer Programming is not possible on a DVD-R or DVD-
RW (Video mode) disc.
●
The information of a programme recorded with On-Disc Timer
Programming is not stored in the library.
●
The play list is not created for the programmes recorded with On-
Disc Timer Programming.
●
Programmes recorded with On-Disc Timer Programming cannot
be edited or protected.
●
On-Disc Timer Programmed discs cannot be used for other
recordings other than On-Disc Timer Programming.
●
On-Disc Timer Programmed discs cannot be used on units from
other manufacturers.
●
The beginning of a programme may not be recorded. In addition,
if the 1st programme's recording stop time and the 2nd
programme's recording start time is the same, the ending of the
1st programme may not be recorded.
●
If there is a power outage while recording, the recordings when
the power outage occurs are not guaranteed.
Masterpage:Left+
How Discs Are Overwritten
(Example 1)
To record a 1-hour serial drama every Friday in SP mode
1st
Blank
2nd 3rd
The first programme is
overwritten by the third.
(Example 2)
To record a 15-minutes serial drama every morning in XP
mode
4th 1st
12/6 12/3
3rd 2nd
12/5 12/4
(Example 3)
To record a 90-minutes serial drama every Sunday in SP
mode
Blank
1st
3rd
Blank
NOTE:
On-Disc Timer Programming may not always work as these
examples.
2nd 1st
4th 3rd
The second programme is
overwritten by the fourth.
8th 5th
12/10 12/7
7th 6th
12/9 12/8
2nd
Blank
Areas treated as blank
cannot be played back
even if they contain
recorded material.