Language; Monitor Set - JVC DR-M150SEK Instructions Manual

Jvc dvd video recorder instructions manual
Hide thumbs Also See for DR-M150SEK:
Table of Contents

Advertisement

Filename [M150SEK_05Name.fm]
M150SEK_00.book Page 19 Wednesday, June 15, 2005 4:04 PM

Language

Turn on the unit.
Turn on the TV and select an input mode such as EXT1.
Slide the TV/DVD switch to DVD.
Menu/Audio/Subtitle Language Set
Some DVD discs contain the DVD menu display, audio and
subtitles in multiple languages. With these discs, you can set the
default language as you like.
The procedure shows how to set AMENU LANGUAGEB as an
example.
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select ADVD SET UPB, then press
ENTER.
3
Press selection keys
DVD SET UP
to select ALANGUAGE
LANGUAGE SET
SETB, then press
ENTER.
4
Press selection keys
to select AMENU
LANGUAGEB, then
press ENTER.
5
SET UP
Press selection keys
to select your desired
language, then press
ENTER.
See ALanguage Code ListB (A pg. 72).
6
Press SET UP to complete the setting.
NOTE:
When the selected language is not available on the disc, the disc's
default menu language is played back.
DVD
TV
Selection Keys
(FGDE)
ENTER
SET UP
FUNCTION SET UP
INITIAL SET UP
AUDIO OUTPUT
UTILITY
MENU LANGUAGE
ENGLISH
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT
Masterpage:Right+

Monitor Set

You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to
DVD SET UP
select AFUNCTION SET
VIDEO IN/OUT RECORDING SET
UPB, then press
ENTER.
3
Press selection keys to
select AVIDEO IN/OUTB,
then press ENTER.
SET UP
4
Press selection keys to
select AMONITOR
DVD SET UP
VIDEO IN/OUT RECORDING SET
TYPEB, then press
ENTER.
5
Press selection keys to
select the desired
setting, then press
ENTER.
6
SET UP
Press SET UP to
complete the setting.
* The boldface settings below indicate the settings at your purchase.
MONITOR TYPE
^
4:3LB / 4:3PS /
8
4:3LB (Letter Box conversion):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear on
the top and the bottom of the screen.
When recording a 16:9 (wide TV) programme, the picture
displayed on the screen will be vertically stretched and black bars
do not appear on the top and the bottom. However, the picture
will be displayed in its normal 16:9 aspect ratio with the top and
bottom black bars when the programme is played back.
4:3PS (Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not be
shown on the screen.
16:9AUTO (Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
16:9FIX (Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9 (wide
TV). The unit automatically adjusts the screen width of the output
signal correctly when playing back a picture whose aspect ratio is
4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.
There are two styles to display the image, APan&ScanB (PS) and
ALetter BoxB (LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
The picture will be shown in the A4:3LBB mode
depending on the disc even if the A4:3PSB
mode is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
INITIAL SETTINGS
19
EN
FUNCTION SET UP
INITIAL SET UP
DISPLAY SET
OTHERS
MONITOR TYPE
16:9AUTO
F-1 INPUT
VIDEO
L-1 INPUT
VIDEO
L-1 OUTPUT
SCART VIDEO
L-2 SELECT
S-VIDEO/RGB
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT
FUNCTION SET UP
INITIAL SET UP
DISPLAY SET
OTHERS
MONITOR TYPE
16:9AUTO
4:3LB
F-1 INPUT
VIDEO
4:3PS
16:9AUTO
L-1 INPUT
VIDEO
16:9FIX
L-1 OUTPUT
SCART VIDEO
L-2 SELECT
S-VIDEO/RGB
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT
16:9AUTO
/ 16:9FIX

Advertisement

Table of Contents
loading

Table of Contents