Icom ID-51E User Manual page 30

5-3 TRANSMIT ADJUSTMENT (Continued)
5-4 RECEIVE ADJUSTMENTS (Continued)
1) Select an adjustment item (band) using
2) Set the SSG as specifi ed (frequency, deviation and output level), and then push
ADJUSTMENT
ADJUSTMENT
S-METER NOTE: "RECEIVE SENSITIVITY" must be adjusted before "S-METER" and "S-METER S3 LEVEL." Other-
[A-BAND]
(VHF S0 level)
(VHF S3 level)
(VHF Full scale)
(UHF S0 level)
(UHF S3 level)
(UHF Full scale)
S-METER NOTE: "RECEIVE SENSITIVITY" must be adjusted before "S-METER" and "S-METER S3 LEVEL." Other-
[AIR BAND]
(AIR S0 level)
(AIR S3 level)
(AIR Full scale)
S-METER
[B BAND]
(VHF S0 level)
(VHF S3 level)
(VHF Full scale)
(UHF S0 level)
(UHF S3 level)
(UHF Full scale)
†
; This output level of a standard signal generator (SSG) is indicated as SSG's open circuit.
/
.
ITEM
wise, "S-METER" and "S-METER S3 LEVEL will not be adjusted properly.
1 1) Set the power supply voltage to 7.4 V.
2) Connect an SSG to the antenna connector and set it as;
–
Modulation
Deviation
2 • Set the SSG as;
[VS0] Frequency
Level
3 • Set the SSG as;
[VS3] Frequency
Level
4 • Set the SSG as;
[VSF]
Level
5 • Set the SSG as;
[US0]
Frequency
Level
6 • Set the SSG as;
[US3] Frequency
Level
7 • Set the SSG as;
[USF] Frequency
Level
wise, "S-METER" and "S-METER S3 LEVEL will not be adjusted properly.
1 1) Set the power supply voltage to 7.4 V.
2) Connect an SSG to the antenna connector and set it as;
–
Modulation
Deviation
2 • Set the SSG as;
[AS0] Frequency
Level
3 • Set the SSG as;
[AS3]
Frequency
Level
4 • Set the SSG as;
[ASF] Frequency
Level
1 1) Set the power supply voltage to 7.4 V.
2) Connect an SSG to the antenna connector, and then set it as;
–
Frequency
Modulation
Deviation
2 • Set the SSG as;
[VS0] Frequency
Level
3 • Set the SSG as;
[VS3]
Frequency
Level
4 • Set the SSG as;
[VSF] Frequency
Level
5 • Set the SSG as;
[US0] Frequency
Level
6 • Set the SSG as;
[US3] Frequency
Level
7 • Set the SSG as;
[USF] Frequency
Level
to automatically adjust.
OPERATION
: 1 kHz
: 3.5 kHz
: (Displayed on the function display)
†
: –10 dBµ (–117 dBm)
: (Displayed on the function display)
†
: –6 dBµ (–113 dBm)
†
: +10 dBµ (–97 dBm)
: (Displayed on the function display)
†
: –10 dBµ (–117 dBm)
: (Displayed on the function display)
†
: –6 dBµ (–113 dBm)
: (Displayed on the function display)
†
: +10 dBµ (–97 dBm)
: 1 kHz
: 30% (AM)
: (Displayed on the function display)
†
: –10 dBµ (–117 dBm)
: (Displayed on the function display)
†
: –6 dBµ (–113 dBm)
: (Displayed on the function display)
†
: +10 dBµ (–97 dBm)
: (Displayed on the function display)
: 1 kHz
: 3.5 kHz
: (Displayed on the function display)
†
: –10 dBµ (–117 dBm)
: (Displayed on the function display)
†
: –6 dBµ (–113 dBm)
: (Displayed on the function display)
†
: +10 dBµ (–97 dBm)
: (Displayed on the function display)
†
: –10 dBµ (–117 dBm)
: (Displayed on the function display)
†
: –6 dBµ (–113 dBm)
: (Displayed on the function display)
†
: +10 dBµ (–97 dBm)
5 - 12
VALUE
–
Push .
(Automatic
adjustment)
–
Push .
(Automatic
adjustment)
–
Push .
(Automatic
adjustment)