Receive Adjustment - Icom ID-51E User Manual

5-3 TRANSMIT ADJUSTMENT (Continued)
5-4 RECEIVE ADJUSTMENTS
1) Select an adjustment item (band) using
2) Set the SSG as specifi ed (frequency, deviation and output level), and then push
ADJUSTMENT
ADJUSTMENT
RECEIVE NOTE:
SENSITIVITY
[A-BAND]
(137.02 MHz)
(145.02 MHz)
(173.98 MHz)
(380.02 MHz)
(435.02 MHz)
(478.98 MHz)
[AIR BAND]
(108.02 MHz)
(127.02 MHz)
(136.95 MHz)
[B-BAND]
(137.02 MHz)
(145.02 MHz)
(173.98 MHz)
(380.02 MHz)
(435.02 MHz)
(478.98 MHz)
S-METER NOTE: "RECEIVE SENSITIVITY" must be adjusted before "S-METER" and "S-METER S3 LEVEL." Other-
[BC BAND]
(AM S0 level)
(AM S3 level)
(AM Full scale)
(WFM S0 level)
(WFM S3 level)
(WFM Full scale)
†
; This output level of a standard signal generator (SSG) is indicated as SSG's open circuit.
/
.
ITEM
"RECEIVE SENSITIVITY" must be adjusted before "S-METER." Otherwise, "S-METER" will
not be adjusted properly.
– 1 1) Set the power supply voltage to 7.4 V.
2) Connect an SSG to the antenna connector, and then set it as;
[VTL] 2
Frequency
[VTM] 3
Level
Modulation
[VTH] 4
Deviation
[UTL] 5
[UTM] 6
[UTH] 7
– 1 1) Set the power supply voltage to 7.4 V.
2) Connect an SSG to the antenna connector, and then set it as;
[ATL] 2
Frequency
[ATM] 3
Level
Modulation
[ATH] 4
Deviation
– 1 1) Set the power supply voltage to 7.4 V.
2) Connect an SSG to the antenna connector, and then set it as;
[VTL]
Frequency
[VTM] 2
Level
Modulation
[VTH] 3
Deviation
[UTL] 4
[UTM] 5
[UTH] 6
wise, "S-METER" and "S-METER S3 LEVEL will not be adjusted properly.
1 1) Set the power supply voltage to 7.4 V.
2) Connect an SSG to the antenna connector and set it as;
–
Modulation
Deviation
2 • Set the SSG as;
[BS0] Frequency
Level
3 • Set the SSG as;
[BS3]
Level
4 • Set the SSG as;
[BSF]
Frequency
Level
5 • Set the SSG as;
[BS0] Frequency
Level
6 • Set the SSG as;
[BS3] Frequency
Level
7 • Set the SSG as;
[BSF] Frequency
Level
to automatically adjust.
OPERATION
: (Displayed on the function display)
†
: –10 dBµ (–117 dBm)
: 1 kHz
: 3.5 kHz
: (Displayed on the function display)
†
: –10 dBµ (–117 dBm)
: 1 kHz
: 30% (AM)
: (Displayed on the function display)
†
: –10 dBµ (–117 dBm)
: 1 kHz
: 3.5 kHz
: 1 kHz
: 30% (AM)
: (Displayed on the function display)
†
: +2 dBµ (–105 dBm)
†
: +5 dBµ (–102 dBm)
: (Displayed on the function display)
†
: +12 dBµ (–95 dBm)
: (Displayed on the function display)
†
: +2 dBµ (–105 dBm)
: (Displayed on the function display)
†
: +5 dBµ (–102 dBm)
: (Displayed on the function display)
†
: +12 dBµ (–95 dBm)
5 - 11
VALUE
–
Push .
(Automatic
adjustment)
–
Push .
(Automatic
adjustment)
–
Push .
(Automatic
adjustment)
–
Push .
(Automatic
adjustment)