Event Setup - D-Link DCS-6115 User Manual

Section 3: Configuration
Typically, when motion is detected, the DCS-6115 sends images to a FTP server or sends e-mail notifications. As shown in the illustration below,
an event can be triggered by various conditions, such as motion detection or system reboot. When an event is triggered, a specified action will be
performed. You can configure the Network Camera to send snapshots or videos to your e-mail address or FTP site.
Instructions for setting an Event begin on the next page. Proper setup enables your DCS-6115 to perform as expected when a trigger is activated.
D-Link DCS-6115 User Manual
Event Condition
ex.
Motion detection,
Periodically, Digital input,
System reboot
(what to send)
ex.
Snapshot, Video Clips

Event Setup

Action
Media
(where to send)
ex.
Email, FTP
Server
41