Event Setup - D-Link DCS-7010L User Manual

Section 4: Coniguration
In a typical application, when motion is detected, the DCS-7010L sends images to a FTP server or via e-mail as notiications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection. When an event is triggered, a speciied action will be
performed. You can conigure the Network Camera to send snapshots or videos to your e-mail address or FTP site.
To start plotting an event, it is suggested to conigure server and media columns irst so that the Network Camera will know what action shall be
performed when a trigger is activated.
D-Link DCS-7010L User Manual

Event Setup

Event Condition
ex.
Motion detection,
Periodically, Digital input,
System reboot
(what to send)
ex.
Snapshot, Video Clips
Action
Media
(where to send)
ex.
Email, FTP
Server
49