Event Setup - D-Link DCS-2670L User Manual

Section 3: Configuration
The DCS-2670L has a comprehensive Event system that lets you configure the camera to perform certain actions when an event occurs. For
example, when motion is detected, you can have snapshots sent to an e-mail address. You can also configure the camera to take regular video
recordings according to a schedule you define. Detailed information for the following steps can be found at Add Server on page 38, Add Media
on page 39, and Add Event on page 41.
Step 1: Select your destination Server and Media type
Server
Media
D-Link DCS-2670L User Manual
• E-mail
• SD Card
• Snapshot
• Video Clip
• System Log
When an event is triggered:
Event

Event Setup

Step 2:
Event
Action
Action
Select your Trigger event and Action
• Video motion detection
• Periodic
• System boot
• Network lost
• Sound detection
• Event schedule
• Server (can be any pre-selected
media such as snapshot, video
clip, or system log)
Server 1:
E-mail
Server 2:
SD Card
37